Product ID: 1789
Exhaust gas temperature sensor 1.8m 4.7mm covered tip

Warning: filemtime(): stat failed for img/store/1789--exhaust_gas_temp_1.8--02.jpg in /home/httpd/vhosts/maxxecu.com/dev2.maxxecu.com/pages/product_store-single_product_list.php on line 1516
Exhaust gas temperature sensor 1.8m 4.7mm covered tip

Warning: filemtime(): stat failed for img/store/1789--exhaust_gas_temp_1.8--02.jpg in /home/httpd/vhosts/maxxecu.com/dev2.maxxecu.com/pages/product_store-single_product_list.php on line 1528
Exhaust gas temperature sensor 1.8m 4.7mm covered tip

Exhaust gas temperature sensor 1.8m 4.7mm covered tip

$108.68

Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.

in stock
QTY:
More information

Primarily designed to be connected directly to MaxxECU, but obviously work with other systems aswell.
4.7 mm thickness of the sensor.
Reaciton time: 1250ms
-100 to 1300 degress Celscius (-148 to 2375 F)
Covered sensor tip. May be needed with ALS and some race E85 fuels.


For tapered thread compression fitting to the stainless steel bung: about 2.5 turns to finger tight, then 3/4 of a wrench turn.
For tapered thread compression fitting to the mild steel bung: about 3.25 turn to finger tight, then 1 wrench turn.

What is important is that the threads do not leak. If the fitting is overtightened with a wrench the fitting will be impossible to remove. It is important that the fitting is not overtightened.

Recommended products

EGT (TYPE-K) amplifier 0-5v out
EGT (TYPE-K) amplifier 0-5v out

$42.90

in stock