Product ID: 1791
Exhaust gas temperature sensor 1.1m 4.7mm (without connector)

Warning: filemtime(): stat failed for img/store/1791--exhaust_gas_temperature_sensor_1.1m--02.jpg in /home/httpd/vhosts/maxxecu.com/dev2.maxxecu.com/pages/product_store-single_product_list.php on line 1516
Exhaust gas temperature sensor 1.1m 4.7mm (without connector)

Warning: filemtime(): stat failed for img/store/1791--exhaust_gas_temperature_sensor_1.1m--03.jpg in /home/httpd/vhosts/maxxecu.com/dev2.maxxecu.com/pages/product_store-single_product_list.php on line 1519
Exhaust gas temperature sensor 1.1m 4.7mm (without connector)

Warning: filemtime(): stat failed for img/store/1791--exhaust_gas_temperature_sensor_1.1m--02.jpg in /home/httpd/vhosts/maxxecu.com/dev2.maxxecu.com/pages/product_store-single_product_list.php on line 1528
Exhaust gas temperature sensor 1.1m 4.7mm (without connector)

Warning: filemtime(): stat failed for img/store/1791--exhaust_gas_temperature_sensor_1.1m--03.jpg in /home/httpd/vhosts/maxxecu.com/dev2.maxxecu.com/pages/product_store-single_product_list.php on line 1533
Exhaust gas temperature sensor 1.1m 4.7mm (without connector)

Exhaust gas temperature sensor 1.1m 4.7mm (without connector)

$100.67

Sensor for exhaust gas temperature measurement (EGT) with 1.1m cable. 1/8 NPT.

in stock
QTY:
More information

Primarily designed to be connected directly to MaxxECU, but obviously work with other systems aswell.
4.7 mm thickness of the sensor.


For tapered thread compression fitting to the stainless steel bung: about 2.5 turns to finger tight, then 3/4 of a wrench turn.
For tapered thread compression fitting to the mild steel bung: about 3.25 turn to finger tight, then 1 wrench turn.

What is important is that the threads do not leak. If the fitting is overtightened with a wrench the fitting will be impossible to remove. It is important that the fitting is not overtightened.

Recommended products

EGT (TYPE-K) amplifier 0-5v out
EGT (TYPE-K) amplifier 0-5v out

$42.90

in stock